or click here for the Order Form.
#D502(3/8" 80 Grit), #D503(3/8" 120 Grit), #D504(3/16" 80 Grit), #D505(3/16" 120 Grit) $9.00 each
  |
|
|
Whether you are working with metal, wood, rubber, or plastic, flapwheels will grind and polish flat or contoured surfaces.
Flapwheels are used most effectively as a finishing sander after heavier surface sanding and material removal is completed. As the flaps wear down, new abrasive is continuously exposed. This prevents clogging and gives a uniform, constant finish throughout the life of the flapwheel. Flapwheels are available in two grits and two sizes. |
#D617(Core Box), #D618(Chamfer) $5.00 each
|
New router bits will expand the versatility of the Dremel rotary tool when using the router attachment or shaper/router table. The Core Box Bit cuts rounded grooves for a variety of applications including templet cutting, lettering and routing channels. The Chamfer Bit is used for beveling and decorative edging. Bevel is 45°. Use with model 330 Router Attachment and/or Model 231 Shaper/Router Table. |
PASTIME COMPANY
99 Kalamath Street
Denver, Colorado 80223-1549
Telephone: (303) 534-7867 Fax: 630-214-7600 Toll Free: (888)650-8665
www.PastimeCompany.com e-mail: Post@PastimeCompany.com